конференц связь scala rider
Знатоки подскажите, как соединить 3 устройства одновременно 2 х Q3 и 1 х g9x для общей конференц связи?
- Blaze
- 3 июля 2015 в 14:26
- 0
Интернет подсказывает:
ENTER INTERCOM PAIRING MODE ON THE SCALA RIDER G9:
On the G9, select a Channel (A or B) to pair the other unit on. Press the desired Channel button for at least 5 seconds until the Red or Blue LED begins flashing rapidly.
ENTER INTERCOM PAIRING MODE ON THE SECOND UNIT:
G4:
Press the desired Channel button for at least 5 seconds until the Red or Blue LED begins flashing rapidly.
Once both units stop flashing they will display a solid Red or Blue LED (according to the Channel) for 2 seconds to confirm that they are paired and ready to make / receive intercom calls.
Q1/Q3:
(For best results, pair both the G9 and Q3 via Channel A.)
Press the “IC” button for 5 seconds to enter pairing mode. On the Q3, channel A pairs automatically.
Переводить надо? :)
ENTER INTERCOM PAIRING MODE ON THE SCALA RIDER G9:
On the G9, select a Channel (A or B) to pair the other unit on. Press the desired Channel button for at least 5 seconds until the Red or Blue LED begins flashing rapidly.
ENTER INTERCOM PAIRING MODE ON THE SECOND UNIT:
G4:
Press the desired Channel button for at least 5 seconds until the Red or Blue LED begins flashing rapidly.
Once both units stop flashing they will display a solid Red or Blue LED (according to the Channel) for 2 seconds to confirm that they are paired and ready to make / receive intercom calls.
Q1/Q3:
(For best results, pair both the G9 and Q3 via Channel A.)
Press the “IC” button for 5 seconds to enter pairing mode. On the Q3, channel A pairs automatically.
Переводить надо? :)
Только зарегистрированные пользователи могут оставлять ответы и комментировать их.
Войдите, пожалуйста, или зарегистрируйтесь.
Ответы (1)
свернуть / развернуть